# Tuckpointed our 1920s Toronto semi chimney — mortar joint failure, full scope and cost

**URL:** <https://home.renovation.reviews/t/tuckpointed-our-1920s-toronto-semi-chimney-mortar-joint-failure-full-scope-and-cost/46797>\
**Category:** Ontario\
**Created:** [April 26, 2026, 5:12pm UTC](https://home.renovation.reviews/t/tuckpointed-our-1920s-toronto-semi-chimney-mortar-joint-failure-full-scope-and-cost/46797 "2026-04-26T17:12:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 5:12pm UTC](https://home.renovation.reviews/t/tuckpointed-our-1920s-toronto-semi-chimney-mortar-joint-failure-full-scope-and-cost/46797/1 "2026-04-26T17:12:42Z")

</div>

Our 1920s Leslieville semi had a chimney that hadn’t been touched in decades. A roofer noted “significant mortar joint deterioration” during a routine inspection. We finally got it done.

**Assessment:**  
Hired a masonry contractor for an assessment. He found:

- Mortar joints recessed 1/2 to 3/4 inch throughout (code says replace at 3/8 inch recession)
- One face of the chimney had a structural crack running through 3 brick courses
- Chimney crown had a circumferential crack and was admitting water
- Cap was missing — original had been a metal cap, long gone

**Scope and quotes:**

- Quote A: $3,800 (tuckpointing exterior, crown repair, new stainless cap)
- Quote B: $3,200 (same scope)
- Quote C: $2,600 (tuckpointing only, recommended crown repair separately)
- Quote D: $4,200 (proposed partial rebuild from roofline — we felt this was overselling)

**Structural crack note:**  
Showed the crack photo to a structural engineer (one-hour consultation, $280). He said the crack was from thermal movement — not settling — and could be tuckpointed after cutting out the affected courses and repointing. No structural rebuild needed. This saved us significant money vs the contractor who wanted to rebuild.

**We went with Quote B at $3,200.** Included:

- Full tuckpointing, 4-sided exterior
- Structural crack courses: cut out, repointed in Type S mortar
- Crown repair with elastomeric sealant + rebuild of the most deteriorated section
- New 8-inch stainless steel rain cap

**Result:**  
First winter after repair: no water intrusion into the firebox (previously got a trickle during heavy rain). The crown sealant is holding well. Mortar is matched reasonably well in colour to the original.

**Lesson:** Don’t assume a masonry contractor’s recommendation to “rebuild” is correct. Get an independent assessment if anyone recommends a more extensive repair than tuckpointing.
