# Pot Lights in a 1970s Toronto Home - What Happened When We Opened the Ceiling

**URL:** <https://home.renovation.reviews/t/pot-lights-in-a-1970s-toronto-home-what-happened-when-we-opened-the-ceiling/46706>\
**Category:** DIY & Tutorials\
**Created:** [April 26, 2026, 3:46pm UTC](https://home.renovation.reviews/t/pot-lights-in-a-1970s-toronto-home-what-happened-when-we-opened-the-ceiling/46706 "2026-04-26T15:46:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 3:46pm UTC](https://home.renovation.reviews/t/pot-lights-in-a-1970s-toronto-home-what-happened-when-we-opened-the-ceiling/46706/1 "2026-04-26T15:46:12Z")

</div>

Had pot lights installed in our 1974 Toronto bungalow kitchen and living room. What the electrician found when he opened the ceiling is worth sharing as a cautionary tale for other older-home owners.

**What We Planned**

12 pot lights in the kitchen and 8 in the living room. Both rooms are directly below the attic. Went with ICAT-rated LED fixtures (IC + Air-Tight combined, integrated LED, 4-inch, 2700K).

**What We Found**

When the electrician opened the ceiling to run wires:

Kitchen: existing knob-and-tube wiring in parts of the ceiling. Required remediation before new fixtures could be connected. This added $1,800 to the project but it was not optional.

Attic above living room: insulation was blown-in vermiculite (1970s product, possibly contains asbestos). We had a sample tested. Result: non-detect for asbestos. Bullet dodged, but the test was $120 and necessary.

**Final Cost Breakdown**

20 ICAT LED fixtures: $1,600 (Halo brand from supply house)  
Electrical labour (2 days): $2,400  
Knob-and-tube remediation in kitchen area: $1,800  
Dimmer switches (4 zones): $320  
Permits + ESA inspection: $280  
Total: $6,400

**What I Wish Someone Had Told Me**

Any electrical work in a pre-1980 Toronto home should budget 20-30% contingency for knob-and-tube discovery. Our electrician said it is present in the majority of 1960s-1980s Toronto homes they open up.

Also: specify ICAT explicitly to your contractor. “LED pot lights” is not specific enough. ICAT is the spec that matters for attic-adjacent ceilings.
