# Our Sump Pump Failed During the April 2025 Storm - What We Did and What We Changed

**URL:** <https://home.renovation.reviews/t/our-sump-pump-failed-during-the-april-2025-storm-what-we-did-and-what-we-changed/46723>\
**Category:** Ontario\
**Created:** [April 26, 2026, 4:02pm UTC](https://home.renovation.reviews/t/our-sump-pump-failed-during-the-april-2025-storm-what-we-did-and-what-we-changed/46723 "2026-04-26T16:02:14Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 4:02pm UTC](https://home.renovation.reviews/t/our-sump-pump-failed-during-the-april-2025-storm-what-we-did-and-what-we-changed/46723/1 "2026-04-26T16:02:15Z")

</div>

Our sump pump failed during the major April storm in 2025 and we got 3 inches of water in our basement. Sharing what happened and the full system upgrade we did afterward.

**What Failed**

Primary pump was 11 years old - a standard 1/3 HP plastic Zoeller from the previous owner. Float switch stuck. By the time we got home, there was 3 inches of water across the entire basement floor (fortunately unfinished at the time).

Damage: hot water heater wiring ($280 repair), two storage boxes of books and clothes (irreplaceable), one box of tools ($400 replacement). Total: $1,200+ in damage.

**The Upgrade**

Hired a plumber/waterproofing company to do a full sump system replacement.

**New Primary: Wayne CDU980E (3/4 HP, cast iron)**

- 4,600 GPH at 10 ft head (significant upgrade from 1/3 HP)
- Cast iron volute - far more durable than plastic
- Installed new check valve and discharge line
- Cost: $680 installed

**Basement Watchdog Emergency Backup**

- Dedicated backup pump on AGM deep-cycle battery
- Float set 2 inches higher than primary float
- Activates if primary fails OR if power goes out
- 7-hour run capacity at moderate cycle rate
- Includes alarm if backup activates (phone notification)
- Cost: $650 installed

**Total system: $1,330 installed**

**One Year Later**

Backup activated twice during subsequent storms (power blips that lasted under 2 hours each). Both times the basement stayed dry. The primary has handled two significant spring melt seasons without issue.

**What I Would Tell Anyone Considering a “Wait and See” Approach**

Do not wait for a failure. An 11-year-old pump in Ontario should be replaced proactively. The $1,330 for a proper system is cheap insurance against $5,000-$50,000 in basement damage.
