# Open Concept Renovation in Toronto 2026: What's Involved in Removing a Wall

**URL:** <https://home.renovation.reviews/t/open-concept-renovation-in-toronto-2026-whats-involved-in-removing-a-wall/46464>\
**Category:** DIY & Tutorials\
**Created:** [April 26, 2026, 12:33pm UTC](https://home.renovation.reviews/t/open-concept-renovation-in-toronto-2026-whats-involved-in-removing-a-wall/46464 "2026-04-26T12:33:34Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 12:33pm UTC](https://home.renovation.reviews/t/open-concept-renovation-in-toronto-2026-whats-involved-in-removing-a-wall/46464/1 "2026-04-26T12:33:34Z")

</div>

Opening up a closed floor plan is one of the most popular — and most misunderstood — renovations in the GTA. Here’s what it actually involves.

**Step 1: Determine if the wall is load-bearing**

This is non-negotiable. A load-bearing wall carries the weight of floors and roof structure above. Removing it without proper support causes structural failure. Signs a wall may be load-bearing: runs perpendicular to floor joists, located near the centre of the home, has walls directly above or below it in the same location.

Determination method: A structural engineer reviews your home plans and inspects the site. Cost: $1,500–$4,000 for structural assessment and stamped drawings. **Required for permit.**

**Step 2: Engineering and permit**

Structural engineer specifies the beam required to replace the wall’s load-bearing function. A permit is required for any structural wall removal in Ontario. Toronto permit processing: 15–25 business days.

**Step 3: Temporary shoring**

Before any wall removal begins, temporary supports (shoring) carry the load while the permanent beam is installed. This is critical and not a DIY step.

**Step 4: Beam installation**

The engineered beam (typically LVL — laminated veneer lumber — or steel) is installed in the header position. Temporary posts support it until permanent columns or posts are in place.

**Step 5: Rough-in adjustments**

Electrical, plumbing, or HVAC that ran through the removed wall must be rerouted. This adds cost (often $2,000–$8,000) and requires inspection.

**Total cost for wall removal + beam:** $8,000–$25,000+ depending on span, beam type, and what’s in the wall.

Has anyone done an open-concept conversion in Toronto recently? Share your experience — wall type, beam spec, permit timeline, and contractor.

_[home.renovation.reviews](https://home.renovation.reviews) — Canada’s renovation community._
