# Ontario Electrical Renovation 2026: K&T, Aluminum Wiring, Panels, and ESA

**URL:** <https://home.renovation.reviews/t/ontario-electrical-renovation-2026-k-t-aluminum-wiring-panels-and-esa/46579>\
**Category:** Ontario\
**Created:** [April 26, 2026, 1:51pm UTC](https://home.renovation.reviews/t/ontario-electrical-renovation-2026-k-t-aluminum-wiring-panels-and-esa/46579 "2026-04-26T13:51:40Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 1:51pm UTC](https://home.renovation.reviews/t/ontario-electrical-renovation-2026-k-t-aluminum-wiring-panels-and-esa/46579/1 "2026-04-26T13:51:40Z")

</div>

## Ontario Electrical 2026: What Your Home’s Wiring Era Means

### Knob-and-Tube Wiring (Pre-1950)

Most Ontario insurers won’t insure homes with active K&T. No ground conductor. Open air wiring system.

**Cost to replace:** $12,000-$25,000 for a typical GTA home.

**Required before any major renovation** – you can’t insulate over K&T without creating a fire risk.

### Aluminum Wiring (1960s-1970s)

Not inherently dangerous if properly managed. Problem: oxide layer at connections + expansion/contraction rate.

**Solution 1 – Pigtailing:** Connect aluminum runs to short copper pigtails at every device using approved connectors (Ideal 65 or AlumiConn). Cost: $3,000-$10,000. ESA-accepted.

**Solution 2 – Full replacement:** $8,000-$18,000. Complete peace of mind.

### Panel Upgrades

| Upgrade | Cost |
| --- | --- |
| 60A → 100A | $1,500-$2,500 |
| 100A → 200A | $2,500-$4,500 |
| 200A → 400A | $4,500-$8,000 |

**200A recommended** before adding EV charger or cold-climate heat pump.

All panel work requires ESA permit + inspection in Ontario.

### EV Charger Rough-In

Level 2 (240V, 40-50A dedicated circuit): $800-$1,800 installed.  
**Do this during renovation** – costs 3-4x more after walls close.

### AFCI/GFCI Requirements (Current OBC)

- GFCI: within 1.5m of any water source
- AFCI: bedrooms (and expanding with each code update)

LF Builders coordinates electrical within all GTA renovation scopes: [lfbuilders.ca](https://lfbuilders.ca)  
[home.renovation.reviews](https://home.renovation.reviews) | Samm Simon 251 KM: [sammsimon.ca](https://sammsimon.ca)
