# Legalizing our basement apartment in Scarborough: fire separation, egress windows, permit timeline

**URL:** <https://home.renovation.reviews/t/legalizing-our-basement-apartment-in-scarborough-fire-separation-egress-windows-permit-timeline/46810>\
**Category:** Ontario\
**Created:** [April 26, 2026, 5:27pm UTC](https://home.renovation.reviews/t/legalizing-our-basement-apartment-in-scarborough-fire-separation-egress-windows-permit-timeline/46810 "2026-04-26T17:27:53Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 5:27pm UTC](https://home.renovation.reviews/t/legalizing-our-basement-apartment-in-scarborough-fire-separation-egress-windows-permit-timeline/46810/1 "2026-04-26T17:27:53Z")

</div>

Our Scarborough house has had a basement unit since the 1980s — built by a previous owner, never permitted, definitely not up to code. When our insurance renewal came and the adjuster asked about it, we decided it was time to properly legalize it.

**What we were working with:** 2-bedroom basement unit, 680 sqft, existing 3-piece bathroom, small kitchen. But: no egress windows in either bedroom, plank subfloor above with no fire separation, interconnected smoke alarms missing, shared electrical panel.

**Toronto ARU permit process:** Applied through the Additional Residential Unit permit stream at the city. Our application took 28 days. They required: site plan, floor plan showing unit layout, window schedule showing egress compliance, and a note on the fire separation assembly we intended to use.

**Fire separation scope:** The inspector told us our plank subfloor above the unit was “no assembly” — it needed Type X drywall on the basement ceiling to achieve 30-minute fire resistance. We installed 5/8-inch Type X drywall on furring channels to the entire basement ceiling (720 sqft including mechanical room): $4,200. All penetrations — 14 of them — fire-caulked.

**Egress windows:** Both bedrooms had the original 1980s hopper windows, 12x18 inches — nowhere near OBC requirement. We installed new casement windows: $1,800 for both. No wells required — the windows are at grade level and barely below grade at the sill.

**Other scope:**

- New smoke alarm system (interconnected, combination CO/smoke in basement): $380 parts, $280 install
- Sub-panel for the unit: $1,450
- New exterior door with self-closer (required at the unit entry from common area): $1,100
- Permit fees: $740

**Total: $9,950**

Now fully permitted. Insurance sorted. Unit rents for $1,700/month. We should have done this years ago.
