# Kitchen Backsplash Tile Install - What I Learned DIYing My First Tile Project

**URL:** <https://home.renovation.reviews/t/kitchen-backsplash-tile-install-what-i-learned-diying-my-first-tile-project/46717>\
**Category:** DIY & Tutorials\
**Created:** [April 26, 2026, 3:56pm UTC](https://home.renovation.reviews/t/kitchen-backsplash-tile-install-what-i-learned-diying-my-first-tile-project/46717 "2026-04-26T15:56:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 3:56pm UTC](https://home.renovation.reviews/t/kitchen-backsplash-tile-install-what-i-learned-diying-my-first-tile-project/46717/1 "2026-04-26T15:56:56Z")

</div>

Did my first tile project ever on our kitchen backsplash last month - 22 sq ft of 3x12 subway tile in our North York kitchen. Sharing the process, mistakes, and lessons for other first-timers.

**Why DIY?**

Quotes ranged from $750-$1,100 for labour on a job that seemed manageable. Tile: $180 for the Daltile subway (bought extra, used about 19 sq ft). Decided to try it.

**Tools Acquired**

- Rented wet tile saw from Home Depot: $55/day
- Notched trowel (3/16" V-notch): $12
- Grout float: $14
- Grout sponge + bucket: $8
- Level, tape measure: had these
- Tile spacers (1/16"): $6

Total tool spend: $95 (wet saw rental + tools)

**The Process**

Day 1: Remove old backsplash (it was just painted drywall - confirmed no moisture damage), install cement board behind sink area, let dry overnight. 3 hours.

Day 2: Lay out tile dry, mark centre line, mix polymer-modified thinset, spread thinset with notched trowel in small sections, set tile. Got through 80% of the field tile. 5 hours.

Day 3: Cut and install perimeter and outlet tiles (all the tricky cuts). Hardest part - a few wasted tiles learning the wet saw. 4 hours.

Day 4: Apply Mapei Ultracolor Plus grout, clean, remove spacers. 3 hours.

**Mistakes Made**

Thinset coverage: first section I applied thinset to the wall but not the back of the tiles. Get 95%+ coverage on the back too for proper adhesion - learned this after reading it was the correct method.

Grout timing: applied grout a bit early (24 hours after thinset instead of 48). It was fine but set faster than expected.

Cutting: wasted 6 tiles figuring out the wet saw. Always budget 15% extra tiles.

**Result**

Looks great. Could not be happier. Total cost: $180 (tile) + $95 (tools) + $45 (thinset/grout/supplies) = $320 vs $750-$1,100 contractor quote. Saved $430-$780.

Is it perfect? No - look closely and some grout lines are slightly uneven. Does it look great in the kitchen? Yes.

For Ontario renovation community discussions visit home.renovation.reviews.
