# Full-height kitchen backsplash in our Oakville kitchen — porcelain to ceiling, full cost and install notes

**URL:** <https://home.renovation.reviews/t/full-height-kitchen-backsplash-in-our-oakville-kitchen-porcelain-to-ceiling-full-cost-and-install-notes/46795>\
**Category:** Ontario\
**Created:** [April 26, 2026, 5:12pm UTC](https://home.renovation.reviews/t/full-height-kitchen-backsplash-in-our-oakville-kitchen-porcelain-to-ceiling-full-cost-and-install-notes/46795 "2026-04-26T17:12:33Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 5:12pm UTC](https://home.renovation.reviews/t/full-height-kitchen-backsplash-in-our-oakville-kitchen-porcelain-to-ceiling-full-cost-and-install-notes/46795/1 "2026-04-26T17:12:33Z")

</div>

We just finished a full-height porcelain backsplash installation in our Oakville kitchen — tile from counter level to the 9-foot ceiling. This was the final piece of our kitchen reno and it transformed the space.

**What we tiled:**

- Full backsplash area: counter to ceiling (aprox 8.5 ft height)
- Two walls behind the range and main prep area
- Total area: approximately 85 sq ft
- Tile: 12x24 Porcelain in a vertical stack bond, matte white

**Why full height:**  
Short story — our kitchen designer showed us both standard height (18 inches to upper cabinets) and full height. The full height version looked $50,000 more expensive. It was maybe $1,200 more expensive in tile and labour. Not a difficult decision.

**Challenges with full height:**

- Required 6 cuts per column at upper cabinet and soffit interface
- Had to remove the upper cabinet and re-mount after tiling behind them (2 cabinets)
- Range hood required tile behind and around it — more complex cuts
- More tile needed above upper cabinets (the section between top of cabinets and ceiling)

**Cost:**

- Tile supply (12x24 porcelain, 110 sq ft with 25% overage): $1,320 (at $12/sq ft)
- Grout (charcoal matte): $85
- Labour (tile setter, 2.5 days): $2,400
- Patching behind unmounted cabinets (minor): $180
- **Total: $3,985**

Previous partial-height backsplash (same kitchen): was $1,100 for 30 sq ft. The full-height addition cost $2,885 extra. Worth every dollar.
