# Exterior paint on our 1950s Leaside house: lead paint test result, prep process, and total cost

**URL:** <https://home.renovation.reviews/t/exterior-paint-on-our-1950s-leaside-house-lead-paint-test-result-prep-process-and-total-cost/46827>\
**Category:** Ontario\
**Created:** [April 26, 2026, 5:44pm UTC](https://home.renovation.reviews/t/exterior-paint-on-our-1950s-leaside-house-lead-paint-test-result-prep-process-and-total-cost/46827 "2026-04-26T17:44:53Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 5:44pm UTC](https://home.renovation.reviews/t/exterior-paint-on-our-1950s-leaside-house-lead-paint-test-result-prep-process-and-total-cost/46827/1 "2026-04-26T17:44:53Z")

</div>

Our Leaside house was built in 1953. Before painting, we had to deal with the elephant in the room for every pre-1978 Ontario home: lead paint.

**Lead paint testing:** Had a certified firm come out with XRF (X-ray fluorescence) testing — the most accurate method, no sampling required. Results: lead detected in the original layers on all exterior wood trim, window frames, and the original board-and-batten sections. The stucco body had no lead (was re-stuccoed in the 1980s).

**What this means for painting:** Lead-safe work practices are required under Ontario MOL guidelines. The contractor cannot dry-scrape or sand with power tools (this creates lead dust). Allowable methods: wet scraping, chemical strippers, heat guns below 500°C. All waste must be collected in sealed bags and disposed as hazardous material.

**Contractor qualification:** We hired a contractor who had taken the RRP (Renovation, Repair, and Painting) training for lead-safe work. Not every painting contractor has this — we asked specifically and one of four bidders walked away when we mentioned lead.

**Preparation scope:**

- Chemical stripper on all window frames and trim where paint was significantly built up or peeling (not the entire house — just areas where adhesion was compromised)
- Wet scrape at problem areas
- Caulk all trim joints, window perimeters, wood-to-stucco joints (over 60 linear feet of caulk applied)
- Lead-safe primer on all bare wood (Zinsser Bulls Eye 1-2-3 latex — compatible with topcoat, safer than alkyd options for VOC reasons)
- Body: Benjamin Moore Aura Exterior, 2 coats, on stucco
- Trim and windows: Benjamin Moore Aura Exterior in satin, 2 coats

**Cost:** $14,200 for the full house. The lead-safe premium was approximately $2,400 over a standard project of this size (slower prep, waste disposal, PPE costs).

Three years later: not a peel, not a crack. The proper prep made the difference.
