# Crack injection on three basement cracks in our Hamilton home — polyurethane worked, here is what we did

**URL:** <https://home.renovation.reviews/t/crack-injection-on-three-basement-cracks-in-our-hamilton-home-polyurethane-worked-here-is-what-we-did/46775>\
**Category:** Ontario\
**Created:** [April 26, 2026, 4:52pm UTC](https://home.renovation.reviews/t/crack-injection-on-three-basement-cracks-in-our-hamilton-home-polyurethane-worked-here-is-what-we-did/46775 "2026-04-26T16:52:57Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 4:52pm UTC](https://home.renovation.reviews/t/crack-injection-on-three-basement-cracks-in-our-hamilton-home-polyurethane-worked-here-is-what-we-did/46775/1 "2026-04-26T16:52:57Z")

</div>

Our Hamilton 1960s poured concrete basement had three vertical cracks — two of them actively leaking during heavy rain. Got them injected last fall. Sharing the process and results.

**Diagnosis:**

- Crack 1 (south wall): 2.3mm wide, 4 ft long, actively weeping during/after heavy rain
- Crack 2 (south wall, adjacent): 1.8mm wide, 3 ft long, same wet pattern
- Crack 3 (east wall): hairline crack, 2 ft long, always dry

**What the contractor recommended:**

- Cracks 1 and 2: polyurethane injection (active moisture present, needs flexible seal)
- Crack 3: epoxy injection (dormant crack, restore structural monolithic integrity)

This matched my own research — I was glad the contractor said the same thing independently.

**Process:**

- Surface ports drilled at 8-inch intervals along each crack
- Surface sealed with hydraulic cement between ports
- Low-pressure injection of material through each port in sequence
- Let cure overnight
- Ports cut off, surface patched

**Cost:**

- Cracks 1 and 2 (polyurethane): $650 each = $1,300
- Crack 3 (epoxy): $480
- **Total: $1,780**

**Results:**  
Two heavy rain events since injection — zero water in basement. Crack 3 was cosmetically fine before and is now sealed.

The contractor offered a 10-year warranty against water infiltration through the injected cracks. Not a lifetime warranty, but 10 years is meaningful for this type of work.
