# Concrete driveway was spalling badly — here is what repair vs replace actually cost in Mississauga

**URL:** <https://home.renovation.reviews/t/concrete-driveway-was-spalling-badly-here-is-what-repair-vs-replace-actually-cost-in-mississauga/46741>\
**Category:** Ontario\
**Created:** [April 26, 2026, 4:24pm UTC](https://home.renovation.reviews/t/concrete-driveway-was-spalling-badly-here-is-what-repair-vs-replace-actually-cost-in-mississauga/46741 "2026-04-26T16:24:09Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 4:24pm UTC](https://home.renovation.reviews/t/concrete-driveway-was-spalling-badly-here-is-what-repair-vs-replace-actually-cost-in-mississauga/46741/1 "2026-04-26T16:24:09Z")

</div>

Our 22-year-old concrete driveway had been spalling for years — big chunks of the surface layer coming off, especially near the street where the salt exposure is worst. Got quotes for both repair and full replacement.

**Repair quotes (resurfacing + crack injection):**

- Contractor A: $4,200 (concrete overlay, crack injection on 3 cracks)
- Contractor B: $3,600 (same scope)
- Both warned the substrate had delamination in two sections — “might not bond”

**Replacement quotes (2-car, 600 sq ft):**

- Contractor A: $11,400 (4-inch reinforced with rebar, broom finish)
- Contractor B: $10,100 (fibre reinforced, no rebar — said it was adequate for residential)
- Contractor C: $12,800 (4-inch with rebar, 28-day cure, 10-year warranty)

**We went with replacement** — Contractor A’s $11,400 quote. The resurfacing contractors themselves admitted the delamination areas would likely fail within 3 to 5 years, meaning we’d be back to replacement anyway.

4 weeks post-pour, looks great. Used calcium chloride for curing blanket during an unexpected cold snap — contractor was prepared for it.

**Tip from our contractor:** don’t use salt on new concrete for the first 2 winters. Use sand. The surface is still curing and salt penetration is highest in the early years.
