# Bathroom exhaust fan replaced in our Vaughan home — CFM sizing and why it matters

**URL:** <https://home.renovation.reviews/t/bathroom-exhaust-fan-replaced-in-our-vaughan-home-cfm-sizing-and-why-it-matters/46747>\
**Category:** Ontario\
**Created:** [April 26, 2026, 4:28pm UTC](https://home.renovation.reviews/t/bathroom-exhaust-fan-replaced-in-our-vaughan-home-cfm-sizing-and-why-it-matters/46747 "2026-04-26T16:28:12Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 4:28pm UTC](https://home.renovation.reviews/t/bathroom-exhaust-fan-replaced-in-our-vaughan-home-cfm-sizing-and-why-it-matters/46747/1 "2026-04-26T16:28:12Z")

</div>

Replaced two bathroom fans in our Vaughan home this spring and learned more than I expected about exhaust fan sizing. The original fans were 50 CFM — technically code minimum — but visibly struggled to clear steam from our 120 sq ft master ensuite.

**What we replaced them with:**

- Master ensuite (120 sq ft, tiled steam shower): Panasonic WhisperCeiling FV-20VQ3 at 190 CFM — $340
- Main bath (55 sq ft): Broan-NuTone 80 CFM — $85

**Installation notes:**

- Existing duct was 4-inch flex — upgraded master ensuite to 6-inch rigid metal (contractor ran new duct)
- Added roof cap with proper spring-loaded damper (old one was stuck open all winter — massive heat loss)
- Both fans now on Lutron humidity sensors — auto-run when humidity exceeds 60%, auto-off 20 min after

**Labour:**

- Master bath (new duct, roof penetration): $485
- Main bath (replacement only, existing duct): $175

**Results:**  
Master ensuite clears mirror fog in under 4 minutes now vs 20+ minutes with the 50 CFM fan. Humidity-sensing switch means it runs without us having to think about it.

**Key lesson:** size for the actual room. The 1 CFM per sq ft rule is the minimum — for steam showers, go 1.5x.
