# Basement Finishing Project in Brampton - Full Cost Breakdown and What We Learned

**URL:** <https://home.renovation.reviews/t/basement-finishing-project-in-brampton-full-cost-breakdown-and-what-we-learned/46720>\
**Category:** Ontario\
**Created:** [April 26, 2026, 4:02pm UTC](https://home.renovation.reviews/t/basement-finishing-project-in-brampton-full-cost-breakdown-and-what-we-learned/46720 "2026-04-26T16:02:01Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 4:02pm UTC](https://home.renovation.reviews/t/basement-finishing-project-in-brampton-full-cost-breakdown-and-what-we-learned/46720/1 "2026-04-26T16:02:01Z")

</div>

Finished our 780 sq ft basement in Brampton last year. Total project from permit to final inspection. Sharing the full breakdown.

**Pre-Work Assessment**

Before getting any quotes, we had a radon test done (result: 58 Bq/m3 - well below threshold, no mitigation needed) and a waterproofing inspection (no active moisture issues, just a slightly damp wall in one corner that was addressed with a crystalline waterproofing treatment for $800).

**Permit Process in Brampton**

Applied through Brampton’s ePLANS system. Took 6 weeks to issue. Required: architectural plan showing layout, ceiling heights, egress window location, and smoke/CO detector locations. No structural engineer needed since we weren’t touching load-bearing elements.

**Scope of Work**

- Full perimeter framing (metal studs, 1.5 inches off concrete for thermal break)
- Subfloor (DriCore panels over concrete)
- Bathroom rough-in (3 piece: toilet, sink, shower)
- Egress window in bedroom (existing hopper replaced)
- 2 bedrooms, rec room, bathroom, utility/storage room
- LVP throughout, tile in bathroom
- Full electrical (panel sub-feed, 4 circuits)
- HVAC extension (2 supply, 1 return)

**Cost Breakdown**

Permit: $1,850  
Waterproofing treatment: $800  
Framing + insulation + drywall: $22,400  
Electrical: $8,200  
Plumbing rough-in + finish: $9,400  
HVAC: $3,200  
Egress window: $2,800  
DriCore subfloor (780 sq ft): $3,900  
LVP flooring install: $5,600  
Tile (bathroom): $2,400  
Bathroom fixtures: $2,100  
Doors + trim + paint: $4,800  
Total: $67,450

That works out to $86.50/sq ft.

**Final Inspection**

Passed on first attempt. Inspector was thorough - checked egress window dimensions, smoke/CO locations, bathroom GFCI, and HVAC supply/return. Have all the paperwork on file.

Value add: comparable finished basements in our area are selling for $80-100K more than unfinished equivalents.
