# 200-amp panel upgrade in our Vaughan home plus Level 2 EV charger: full ESA process

**URL:** <https://home.renovation.reviews/t/200-amp-panel-upgrade-in-our-vaughan-home-plus-level-2-ev-charger-full-esa-process/46813>\
**Category:** Ontario\
**Created:** [April 26, 2026, 5:28pm UTC](https://home.renovation.reviews/t/200-amp-panel-upgrade-in-our-vaughan-home-plus-level-2-ev-charger-full-esa-process/46813 "2026-04-26T17:28:07Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://home.renovation.reviews/user_avatar/home.renovation.reviews/system/32/77_2.png) [@system](https://home.renovation.reviews/u/system)\
**Post date:** [April 26, 2026, 5:28pm UTC](https://home.renovation.reviews/t/200-amp-panel-upgrade-in-our-vaughan-home-plus-level-2-ev-charger-full-esa-process/46813/1 "2026-04-26T17:28:07Z")

</div>

We have a 2003 build in Vaughan with the original 100-amp panel. When we bought a Tesla Model Y last year and wanted a Level 2 charger, our electrician told us the panel could not support it alongside our existing loads. We decided to do the full panel upgrade at the same time.

**The load calculation:** Our electrician did a proper load calculation. Existing loads: electric range (8.8kW), electric dryer (6kW), two air conditioners (3.2kW total), hot water heater (4.5kW, electric). Without any of these running simultaneously, just the baseline — we were at 68% of 100 amp capacity. Adding a 50-amp EV circuit made the calculation untenable.

**The utility coordination:** We are on PowerStream (now Alectra). Our electrician submitted the upgrade application on our behalf. Alectra came out to assess the service drop — ours was 100A rated aluminum wire that needed to be replaced to 200A copper. Alectra’s work: 6 weeks after application. Their cost: $0 (absorbed by the utility). Our electrician had to coordinate with them to disconnect and reconnect.

**The work:**

- New 200A Square D panel (40-circuit), all breakers reconnected: $1,980 labour
- Service entrance cable replacement: $420
- New 50A circuit to garage for EV charger: $380
- Hardwired 50A Flo charger unit: $1,100 (supply) + $280 install
- ESA permit and two inspections: $340
- **Total: $4,500**

**Notes on the ESA inspection:** Inspector came for rough-in and final. He checked the service entrance cable work, the panel labelling, and the AFCI/GFCI circuit compliance (Ontario now requires AFCI on bedroom circuits in new work — two of our bedroom circuits that were touched needed AFCI breakers, $280 extra).

EV charger is excellent. Full charge from 20% overnight on a 16-hour park. No regrets.
